Filter By:
- Accessories/Parts (38)
- Cranksets (76)
- Show More Brands
- Show Fewer Brands
Cranksets
$2.00
This is a drive-side stop washer for your Surly Mr. Whirly Crank. It ensures you're properly spaced out down there.
$2.49
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
$2.54
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
$4.55
Race Face 12mm crank bolt/puller for Respond, Chester, and Ride DH cranksets.
$4.55
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
$4.99
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
$4.99
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
$5.99
Replacement spindle spacers for Race Face X-Type FR/DH cranksets.
$6.99
Race Face CINCH Crank Puller
• Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine
• Puller cap utilizes 16mm hex key
• 26mm thread
$7.99
Replacement crank bolt for RaceFace Cinch cranks.
$8.99
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
$8.99
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
$9.99
- M30 cap with self-extracting crank bolt and washer
- Compatible with 2013 and newer FSA Gossamer cranks
$9.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips.
Compatible with:
- Race Face
- Turbine Cinch
- Atlas Cinch
- Atlas (24mm Spindle)
- Turbine (24mm Spindle)
- Aeffect Cinch (175mm length ONLY)
- Most other popular alloy MTB cranks (except some alloy DH cranksets)
$9.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Compatible with:
- Race Face
- Next SL Cinch (G3)
- Sixc Cinch
- Chester
- Respond
- Next/Next SL (24mm Spindle)
- Sixc (24mm Spindle)
- Most other popular carbon MTB cranks and assorted alloy DH cranks
$9.99
Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.
$9.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
$10.99
Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.
$10.99
Race Face aluminum Torx chainring nut/bolt set for triple chainrings. Includes four nut/bolt sets.
$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.
$11.99
Race Face Crank Arm Tab Spacers
• Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used
• Fits all Race Face cranksets
• Use double bolts
$12.00
Replacement crank bolt and puller cap set for Race Face Cinch cranksets.
$13.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms
- Sold as singles
$18.00
This OD Crank Single Speed Spacer Kit gets your Surly OD Crank ready to run as a single. Indluces chainring bolts and spacers. Just add chainring (sold separately).
$43.00
SRAM Force crank spiders are for repairing your crank or converting it to different gearing. Available in 110mm and 130mm BCDs.
$45.00
All-City's lightweight Cross Wizard chainring guard is the perfect addition to a single ring or singlespeed setup. While not a full-on mountain bike ‘bash guard’ these are just the thing to keep your chain on and your teeth intact.
Named after the one and only Cross Wizard! (You have to say it like that, with the exclamation at the end.) These are available in 110mm and 130mm bolt circle diameters for all your ‘crossy needs.
- Material: CNC machined 6061-T6 aluminum
$49.99 - $199.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame
- Road sets include bearings, shields and a wavy washer
- Mountain sets include bearings, shields and a spacer
- Choose ceramic or stainless steel options
$55.00
Lightweight, durable, stiff and designed specifically to work with Bosch and Brose mid-ship motors, SRAM's EX1 crankarms are purpose built for the high-torque E-MTB environment.
- Proven SRAM technologies adapted for the demands of midship-motor E-MTBs
- Compatible with Bosch, Brose and Yamaha bottom bracket interfaces
- Arm Material: Aluminum
- Colors: Black
- Bottom Bracket Interface: ISIS
$59.99
Race Face Crank Spiders allow a quick swap between chainring options on the Race Face CINCH crank system.
Page 1 of 4
Next page